Niobium zirconium alloy

Firmetal, 2020-7-20 09:43:00 PM

A niobium alloy formed by adding a certain amount of zirconium and other elements to the niobium base. It was developed to meet the requirement of cladding materials for fast neutron reactors.

Continue Reading →

Niobium hafnium alloy

Firmetal, 2020-7-17 09:36:00 PM

Niobium alloy formed by adding a certain amount of hafnium and other elements to the niobium base. On a binary phase diagram, niobium and β-Hf form a replacement solid solution. Hafnium is a kind of active element, which is combined with oxygen and carbonation in niobium to form HfO2 and HfC compounds.

Continue Reading →

Zirconium alloy

Firmetal, 2020-7-16 09:49:00 PM

Alloys based on zirconium plus other elements are refractory metals widely used in nuclear reactors. Zirconium alloy has excellent mechanical properties, good machinability and weldability, good corrosion resistance in high temperature and high pressure water and steam at 300 ~ 400℃, small thermal neutron absorption cross section and good compatibility with nuclear fuel, so it is an ideal nuclear reactor core structural material.

Continue Reading →

Zirconium niobium alloy

Firmetal, 2020-7-15 09:33:00 PM

Zirconium alloys based on zirconium and niobium are excellent nuclear engineering materials. The content of niobium in zirconium also varies according to different USES in the reactor. More mature zirconium and niobium alloys include Zr-1Nb alloy, Zr-2.5Nb alloy and Zr-2.5Nb-0.5Cu alloy.

Continue Reading →

Hafnium Wire

Firmetal, 2020-7-14 09:37:00 PM

Hafnium wire, produced by hafnium metal drawing. In nature, hafnium and zirconium often symbiosis, zirconium containing minerals are hafnium, hafnium and zirconium is similar to the quality, hafnium mainly occurs in zirconium quartz. Zircons used for industrial use contain 0.5-2% HfO2. Beryllium zircon in secondary zirconium ores may contain up to 15% HfO2. There is also a metamorphic zircon with a content of more than 5% HfO2.

Continue Reading →

Application effect of cyanide-free environmental gold plating process on titanium alloy

Firmetal, 2020-7-13 09:42:00 PM

Cyanide-free gold plating because of its strong corrosion resistance, good resistance to change, at the same time the gold coating has a variety of colors, can be widely used in jewelry, luxury goods, art, etc. At the same time, it has good electrical conductivity, easy to weld, high temperature resistance, and certain wear resistance. Gold plating is widely used in the long-term stability of performance parameters of precision instruments, clocks, integrated circuits, hardware, bathroom, military products and other occasions.

Continue Reading →

Determination of gas element in tantalum and niobium

Firmetal, 2020-7-10 10:13:00 PM

The gaseous impurities in tantalum, niobium and alloys include oxygen, hydrogen, nitrogen, etc., while carbon and sulfur are often listed as "gases in metals" in analytical chemistry because of their similar behavior in metals and analysis methods and other gases. The forms of gas in metal are mainly molecular gas adsorbed on the metal surface, water and solid solutions such as oxides, hydrides, nitride and carbides generated by interaction with metal.

Continue Reading →

Several USES of tantalum

Firmetal, 2020-7-9 09:40:00 PM

Tantalum is an excellent corrosion resistant material, its corrosion resistance is better than titanium zirconium, comparable to glass, in addition to fluorine, hydrofluoric acid, acid solution containing fluoride ion, fuming sulfuric acid and strong alkali, tantalum is not corroded in most media.

Continue Reading →

Knowledge of seamless titanium tubes

Firmetal, 2020-7-8 09:40:00 PM

Seamless titanium tube is made by extrusion process, and welded titanium tube is made by plate crimping. Generally, the wall thickness of seamless titanium pipe is relatively small, and the diameter is also relatively small. Diameter: O.D-6-108mm Wall thickness: 0.5-8mm Length: maximum 15000mm welded titanium pipe: diameter: O.D-100-610mm Wall thickness: 2-6mm As long as the welding process passes, there is no significant difference in use. Galvanized steel pipe: To improve the corrosion resistance of steel pipe, galvanized general steel pipe (clarion). Galvanized steel pipe is divided into two types: hot dip galvanizing and electric dip galvanizing.

Continue Reading →

One of the strongest alloys, tungsten-rhenium

Firmetal, 2020-7-6 09:45:00 PM

In alloys, the metals most associated with rhenium are tungsten and molybdenum, and rhenium improves the strength and plasticity of both, a phenomenon known as the rhenium effect. The initial recrystallization temperature of tungsten could be increased by 300℃ ~ 500℃ by adding a small amount of 3% ~ 5% rhenium, and the high-temperature strength and plasticity could also be improved.

Continue Reading →

Niobium and Niobium Alloy

Firmetal, 2020-7-3 09:29:00 PM

Niobium and niobium alloys can maintain high strength and good processing performance at high temperature. Can be made into thin plates and parts with complex shapes. Therefore, it can be used as the preferred thermal protection and structural materials on some ultra-high sonic aircraft, space vehicles, satellites, missiles and supersonic low-altitude rockets.

Continue Reading →

Heat treatment of zirconium and its alloys

Firmetal, 2020-7-2 09:30:00 PM

The stress relief annealing temperature of cold-processed (97% deformation rate) pure zirconium is about 300℃. In order to reduce its corrosion and oxygen absorption rate and stable structure, stress annealing is generally carried out after cold-processed. After stress relief annealing, the strength of zirconium alloy does not change much, but the plasticity increases obviously.

Continue Reading →

Repair welding titanium tube, titanium alloy tube

Firmetal, 2020-7-1 09:32:00 PM

In order to obtain titanium tube casting with good repair welding quality, the following points should be paid attention to during repair welding:

Continue Reading →

Heat treatment of niobium, tantalum and their alloys

Firmetal, 2020-6-30 09:29:00 PM

The heat treatment of niobium and its alloys includes uniform annealing, stress relief annealing, recrystallization annealing and thermal mechanical treatment. They have their own characteristics and influence each other. Uniform annealing results in non - uniform results. Stress relief annealing affects the grain size and orientation of recrystallization.

Continue Reading →

Precious metal alloy

Firmetal, 2020-6-24 09:31:00 PM

An alloy based on one of the precious metals and composed of other elements. Precious metal alloys have the main characteristics of precious metals, and have better physical, chemical and mechanical properties, high reliability, stability and long life than single precious metals for their specific USES. Platinum alloy made in 1763.

Continue Reading →

Production technology of titanium alloy

Firmetal, 2020-6-23 09:50:00 PM

Titanium alloys have also encountered some bottlenecks in development, hindering further application. In this regard, all countries are stepping up the research of more "geili" titanium alloy and production technology, striving for a new breakthrough in high dosage, high performance and low cost.

Continue Reading →

The invention relates to a processing technology of niobium alloy bar material

Firmetal, 2020-6-22 09:39:00 PM

With the development of aerospace technology, the performance requirements of aerospace materials are increasing. Among all kinds of superalloy materials, such as tantalum, niobium, molybdenum and tungsten, niobium series alloys have been playing an important role in aerospace materials because of their excellent high-temperature mechanical properties, machinability, low density and low cost.

Continue Reading →

Introduction and important application of Niobium alloy

Firmetal, 2020-6-19 09:40:00 PM

Commercial niobium alloys are poor in strength and malleability, with 70% of niobium alloys requiring cold processing prior to annealing. As a result, niobium alloy with complex structure and low density can be easily manufactured. People generally prefer niobium to other refractory metals such as molybdenum, tantalum and tungsten. In the 1960s, many high-temperature niobium alloys were developed, mainly for nuclear weapons and space applications; However, further development has been limited since the early 1970s.

Continue Reading →

Applications and applications of zirconium

Firmetal, 2020-6-18 09:42:00 PM

Zirconium products are rich in variety, form, the most initial form of mineral zirconium sand, after caustic soda, water treatment, can produce zirconium silicate and zirconium chloride and other primary products; Continue calcination, chlorination, reduction can also be made into zirconia, industrial grade zirconium sponge products; If the technical level of purification and separation reaches a certain level, nuclear grade zirconium sponge can be made.

Continue Reading →

W-ti alloy target

Firmetal, 2020-6-16 09:50:00 PM

W-Ti alloy target material is mainly produced by powder metallurgy process. The preparation method of tungsten titanium alloy target material processed by rolling includes the following steps:

Continue Reading →

Processing methods for hafnium materials

Firmetal, 2020-6-15 09:47:00 PM

The production process of hafnium ingot is similar to that of titanium and zirconium.The hafnium isotopic isocrystal transition temperature is higher (1760℃), so thermal processing can be performed in a dense hexagonal region. There is no phase transition throughout the plastic process. Box-type electric furnace is used for forging heating. The temperature is 1100 ~ 1200℃. The holding time (min) can be half of the ingot diameter (mm). Each fire forging ratio (see alloy steel forging blank) can reach more than 4, the final forging temperature is usually not less than 850℃, forging equipment with hammer and hydraulic press can be.

Continue Reading →

Properties of platinum-iridium alloy

Firmetal, 2020-6-12 09:40:00 PM

Platinum-iridium alloy is a binary alloy containing iridium, which is a continuous solid solution at high temperature. Iridium is volatile and oxidized and can significantly improve the corrosion resistance of platinum. Ptlrl0, Ptlr17.5, Ptlr25, Ptlr30 and other alloys have high hardness, high melting point, high corrosion resistance and low contact resistance. The chemical corrosion rate was 58% of pure platinum, and the oxidation weight loss was 2.8mg/g.

Continue Reading →

Properties of platinum-iridium alloy

Firmetal, 2020-6-12 09:40:00 PM

Platinum-iridium alloy is a binary alloy containing iridium, which is a continuous solid solution at high temperature. Iridium is volatile and oxidized and can significantly improve the corrosion resistance of platinum. Ptlrl0, Ptlr17.5, Ptlr25, Ptlr30 and other alloys have high hardness, high melting point, high corrosion resistance and low contact resistance. The chemical corrosion rate was 58% of pure platinum, and the oxidation weight loss was 2.8mg/g.

Continue Reading →

Introduction to molybdenum-rhenium alloy

Firmetal, 2020-6-11 09:55:00 PM

Molybdenum-Rhenium alloy is an alloy composed of metal molybdenum as matrix element and alloying element Rhenium. The rhenium effect increases plasticity in the alloy. The rhenium content in alloys is generally 11%~50%(mass fraction).

Continue Reading →

Rhenium is an important metal in aerospace field

Firmetal, 2020-6-10 09:43:00 PM

Rhenium is a silvery-white metal with excellent mechanical properties and is an important element in aerospace field. Rhenium is the metal with the highest melting point except tungsten. Besides, rhenium has excellent anti-oxidation and anti-corrosion properties.

Continue Reading →

Niobium titanium superconducting alloy superconducting electric material

Firmetal, 2020-6-9 09:42:00 PM

The production process of hafnium ingot is similar to that of titanium and zirconium.The hafnium isotopic isocrystal transition temperature is higher (1760℃), so thermal processing can be performed in a dense hexagonal region. There is no phase transition throughout the plastic process. Box-type electric furnace is used for forging heating.

Continue Reading →

High temperature alloy

Firmetal, 2020-6-8 09:45:00 PM

The L605 superalloy is the most suitable cobalt-based alloy to be machined and used in working conditions lasting 1800°F. Due to its long and extensive use, this alloy has been used in a large number of working conditions, so it is a material with very general characteristics.

Continue Reading →

Hafnium tube rod production

Firmetal, 2020-6-5 10:10:00 PM

Hafnium material is the core structure material of water - cooled nuclear reactor. Since the hafnium thermal neutron capture capability is very strong, the hafnium tube is used as the neutron absorber of the reactor control rod. The power of the reactor is regulated by its rise and fall in the insertion position of the fuel assembly, so that the chain reaction is fully controlled.

Continue Reading →

Study on high temperature oxidation properties of iridium and iridium rhodium alloys

Firmetal, 2020-6-4 09:37:00 PM

With the rapid development of modern industry and high technology, new materials with high temperature resistance, oxidation resistance and corrosion resistance have been put forward more and more urgently. For example, in order to improve the heat conversion efficiency and energy efficiency of advanced aero-engines, the gas temperature needs to be further improved. The gas temperature has approached or even exceeded the limit service temperature (1200℃) of common nickel-based superalloy.

Continue Reading →

Niobium and its alloys

Firmetal, 2020-6-3 09:44:00 PM

Niobium and niobium alloy have high strength at high temperature, and have relatively small density compared with other high temperature and high strength metals such as tungsten and tantalum. They are easy to process and shape, so they are often used as key components of rocket engines.

Continue Reading →

How hard is the titanium alloy

Firmetal, 2020-6-2 09:33:00 PM

Titanium is a new metal, the performance of titanium is related to the content of carbon, nitrogen, hydrogen, oxygen and other impurities, the purest titanium iodide impurity content does not exceed 0.1%, but its strength is low, high plasticity. 99.5% of industrial pure titanium performance is:

Continue Reading →

Heat treatment of zirconium rods

Firmetal, 2020-6-1 09:41:00 PM

Zirconium bar is an alloy tubular material made of zirconium and other metals. Because of zirconium's excellent nuclear properties and corrosion resistance, zirconium alloy tube rods are often used in nuclear fuel assemblies and reactor structures in water cooled reactors, which are important nuclear materials. Pure zirconium rods are mainly used to make chemical equipment because they are expensive and not used much. The chemical composition and application of the commonly used zirconium tube rods are shown in the table.

Continue Reading →

Fabrication method of butterfly niobium tube processing device

Firmetal, 2020-5-29 09:42:00 PM

The technical field of niobium tube relates to a butterfly-shaped niobium tube processing device, in particular to a butterfly-shaped niobium tube processing device. High light efficiency sodium lamp is the national recommended energy-saving environmental protection products, but also the domestic and foreign light source enterprises vigorously development direction. High luminous sodium lamp series products have high luminous efficiency, which are used for urban road lighting, industrial and mining enterprise site lighting, market lighting, etc.

Continue Reading →

Precious metal alloy

Firmetal, 2020-5-26 09:43:00 PM

A precious metal alloy is an alloy based on one of the metals in a precious metal and composed of other elements. Precious metal alloys have the main properties of precious metals. For their specific USES, they have better comprehensive physical, chemical and mechanical properties than single precious metals, as well as high reliability, stability and long life. Gold platinum alloy was obtained in 1763. In 1802, the hydrogen and oxygen blowing pipe was invented, which provided a high temperature means of smelting precious metal alloy. By 1847, all precious metals except osmium and ruthenium could be smelted.

Continue Reading →

The nature of rhenium

Firmetal, 2020-5-25 09:40:00 PM

Rhenium, a silver-white metal, has the third-highest melting point of any element after tungsten and carbon, and the highest boiling point. Its density ranks fourth in the element, the first three are osmium, iridium and platinum. Rhenium has hexagonal crystal structure with lattice constants a=276.1 PM and c=445.6 PM.

Continue Reading →

Performance characteristics of titanium alloy flange

Firmetal, 2020-5-22 09:32:00 PM

Titanium flange, titanium alloy flange performance characteristics and hot processing related matters needing attention.

Continue Reading →

Introduction and preparation of niobium titanium aluminum alloy

Firmetal, 2020-5-21 09:38:00 PM

A niobium alloy consisting of a certain amount of titanium, aluminum and other alloy elements.

Continue Reading →

Corrosion resistant tantalum alloy

Firmetal, 2020-5-20 09:40:00 PM

Tantalum is a very corrosion-resistant metal. Due to the high production cost, Mo, W, Hf and other elements can be added into it to form a kind of alloy while maintaining its corrosion resistance. Tantalum is resistant to nitric acid, hydrochloric acid, concentrated sulfuric acid and corrosion of liquid metal. Tantalum has good machinability and its mechanical properties at room temperature are similar to those of medium carbon.

Continue Reading →

Chromium zirconium niobium copper is an important material for spot welding electrode

Firmetal, 2020-5-15 09:32:00 PM

Chromium zirconium niobium copper has higher conductivity and hardness than that of class 1 alloy. This kind of alloy can be obtained by cold deformation and heat treatment. Compared with type 1 alloy, it has high mechanical properties, moderate conductivity, in the medium degree of pressure, has a strong resistance to deformation, so it is a general electrode material, widely used for spot welding of low carbon steel, low alloy steel, stainless steel, high temperature alloy, low conductivity of copper alloy, and coated steel.

Continue Reading →

Niobium titanium alloy superconductor

Firmetal, 2020-5-14 09:35:00 PM

The superconductivity of niobium titanium alloy superconductor under ultra high pressure was systematically studied. It is found that niobium titanium alloy still maintains the superconductivity with zero resistance under the pressure of up to 261.7GPa, which indicates that niobium titanium alloy is the most pressure-resistant superconductor known among all superconductors. This pressure is the highest pressure at which superconductivity has been reported.

Continue Reading →

Rhenium tungsten wire

Firmetal, 2020-5-13 09:34:00 PM

Rhenium is expensive, and it was not until 1950 that rhenium was transformed from a laboratory curiosity into an important new metal.

Continue Reading →

Types of Zirconium Alloys

Firmetal, 2020-5-12 09:45:00 PM

There are two series of zirconium base alloys produced on an industrial scale: zirconium tin series and zirconium niobium series. The former is represented by zr-2 alloy and the latter by zr-2.5 Nb alloy. The composition and properties of zirconium and three zirconium alloys are shown in table.

Continue Reading →

Methods and processes for smelting titanium alloy materials

Firmetal, 2020-5-11 09:36:00 PM

Titanium is more and more widely used in industrial production, aerospace, national defense and military industry as well as in daily life, so the requirements for titanium and titanium alloy c and its properties are more and more high. And raw materials of titanium alloy smelting is undoubtedly the most important a key ring, the smelting quality directly affects the subsequent processing performance of the finished product meets the product requirements, so as to promote the development of the titanium alloy smelting technology, including development of new technologies, such as electron beam, plasma cooling bed furnace, to improve the metallurgical quality and the mechanical properties of titanium alloy ingot has created good conditions and basis.

Continue Reading →

Rhenium tungsten wire

Firmetal, 2020-5-8 09:42:00 PM

A alloy wire composed of tungsten and rhenium. Tungsten-rhenium wire has the advantages of high strength at room temperature and high temperature, good plasticity after recrystallization, high resistivity, low resistivity, anti-oxidation and carbonization, strong resistance to "water cycle reaction" and good welding performance. Used for color picture tube hot wire, various tube filament and gate.

Continue Reading →

Nanoscale layered duplex zirconium alloy

Firmetal, 2020-5-7 10:19:00 PM

Zirconium alloy has the characteristics of very low thermal neutron capture cross section, excellent corrosion resistance and high temperature creep resistance, and is widely used in nuclear reactors, such as pressure tubes and nuclear fuel cladding. With the development of nuclear energy towards high efficiency and high safety, higher requirements have been put forward for the mechanical properties, radiation resistance, thermal stability, creep resistance and corrosion resistance of nuclear zirconium alloys.

Continue Reading →

The main role of vanadium in steel

Firmetal, 2020-5-6 9:43:00 PM

(1) refine the structure and grain of steel, increase the grain coarsening temperature, so as to reduce the overheating sensitivity, and improve the strength and toughness of steel.

Continue Reading →

Tantalum and Niobium for Medical Applications

Firmetal, 2020-4-30 10:10:00 PM

Plastic and dental implants are subjected to high mechanical loads during their service life. While many materials currently used in additive manufacturing, including stainless steel and cobalt-chromium alloys, can cope with these mechanical stresses, there are concerns that they release toxic or allergic elements that can cause inflammation in surrounding tissues and reject implants.

Continue Reading →

Titanium alloy 3D printing powder has been used in aerospace

Firmetal, 2020-4-29 09:53:00 PM

The quality of metal additive parts is closely related to the characteristics of metal powder, including powder size, sphericity, fluidity, loose packing density, etc. The application demand of "high precision", "high quality" and "ultra-precision" in aerospace, aviation, medical and other fields also puts forward higher requirements on the quality of metal 3D printing powder.

Continue Reading →

Properties and USES of iron zirconium

Firmetal, 2020-4-28 09:45:00 PM

Iron zirconium is an iron alloy composed of zirconium, iron, silicon and aluminum. The ferrozirconium used for steel making is ferrozirconium silicon, containing Zr15% ~ 45%, Si30% ~ 65%. The products produced by aluminothermic method are called zirconium aluminum iron because they contain aluminum, containing Zr>15%. In 1789, a new oxide called "Zircomia" was discovered at m.h.kelproth in Germany.

Continue Reading →

Preparation and use of vanadium metal

Firmetal, 2020-4-27 10:01:00 PM

The process of recovering vanadium oxide from metal or carbon into vanadium metal is an important part of vanadium metallurgical process. The first four methods are calcium thermal recovery, vacuum carbon thermal recovery, chloride magnesium thermal recovery and aluminum thermal recovery. Calcium thermal recovery an approach to industrial planning for the production of vanadium metal.

Continue Reading →

Tantalum target material

Firmetal, 2020-4-24 09:41:00 PM

In addition, tantalum is also widely used in national defense, aviation, aerospace, electronic computers, high-grade civil electrical appliances and electronic circuits of various electronic instruments.

Continue Reading →

Tantalum plate, tantalum foil and tantalum workpiece cutting and application

Firmetal, 2020-4-23 09:43:00 PM

Tantalum niobium ore is the main raw material for tantalum production, but tantalum niobium ore is often accompanied by a variety of metals, so the main step of tantalum smelting is to decompose the concentrate, purify and separate tantalum and niobium, in order to make tantalum and niobium pure compounds, and finally make metal. For pure tantalum ingots fused by electron beam, 4mm thick plates are obtained by forging and rolling the ingots, and 1mm and 1.6mm thick plates are obtained by cross rolling.

Continue Reading →

The invention relates to a preparation method of sputtering target material of molybdenum-niobium alloy

Firmetal, 2020-4-22 09:35:00 PM

Tantalum niobium ore is the main raw material for tantalum production, but tantalum niobium ore is often accompanied by a variety of metals, so the main step of tantalum smelting is to decompose the concentrate, purify and separate tantalum and niobium, in order to make tantalum and niobium pure compounds, and finally make metal. For pure tantalum ingots fused by electron beam, 4mm thick plates are obtained by forging and rolling the ingots, and 1mm and 1.6mm thick plates are obtained by cross rolling.

Continue Reading →

The invention relates to a preparation method of sputtering target material of molybdenum-niobium alloy

Firmetal, 2020-4-21 09:31:00 PM

Its characteristics include the following steps: step 1: place molybdenum powder and niobium powder in the mixing tank of the mixer, seal the mixing tank and vacuum it, then stir and mix the molybdenum powder and niobium powder evenly under the condition of argon gas protection to obtain the mixed powder; The mass ratio of molybdenum powder to niobium powder is (9 ~ 19) : 1; Step 2. The mixed powder mentioned in step 1 is cold isostatic pressed to obtain the slab, and then the slab is pre-sintered under the condition of vacuum or hydrogen atmosphere protection to obtain the precast blank of molybdenum-niobium alloy.

Continue Reading →

Processing method of pure zirconium wide

Firmetal, 2020-4-20 09:43:00 PM

Pure zirconium has better corrosion resistance than stainless steel, nickel-based alloy, titanium and titanium alloy, and its mechanical properties and technology can be used for corrosion resistance of chemical equipment, especially acetic acid, pesticides, plastics and other industries such as reactors, heat exchangers, chestnut, valve, pipe, etc. The industrial zirconium market is benefiting from the rapid development of China's chemical industry.

Continue Reading →

Corrosion of tantalum and tantalum alloys in sulfuric acid

Firmetal, 2020-4-17 09:34:00 PM

Tantalum and tantalum alloy is one of the few metal materials that can withstand the full concentration of sulfuric acid.

Continue Reading →

7 special properties of Nitinol alloys

Firmetal, 2020-4-15 09:38:00 PM

1. Characteristics of shape memory: shape memory is when the parent phase of a certain shape is cooled above the temperature of Af to below the temperature of Mf to form martensite, and then the martensite is deformed below the temperature of Mf and heated below the temperature of Af. With the reverse phase transformation, the material will automatically recover its shape in the parent phase. In fact, the shape memory effect is a thermally induced phase change in Nitinol alloys.

Continue Reading →

Processing of rhenium

Firmetal, 2020-4-14 09:32:00 PM

Because the rhenium has very excellent performance in the table below, thus adding rhenium form rhenium tungsten alloy, tungsten and molybdenum rhenium is added to the formation of molybdenum rhenium alloy, the alloy electric properties and high temperature ductility, processability can be greatly improved and strengthened, and can be widely used in high temperature heating body, temperature measuring thermocouple, tube cathode and other high temperature parts, etc.

Continue Reading →

Tantalum niobium alloy

Firmetal, 2020-4-13 11:20:00 PM

At present, the application of tantalum niobium new material related high-tech industries include electronics, precision ceramics and precision glass industry; Electro-acoustooptic device; Cemented carbide, aerospace and electronic energy industry; Biomedical engineering; Superconducting industry; Special steel and other industries.

Continue Reading →

Production process of zirconium rod

Firmetal, 2020-4-10 09:40:00 PM

Zirconium and titanium have many similar physical and chemical properties. For example, their melting points are very high, pure titanium: 1668 ℃, pure zirconium: 1852 ℃. Zirconium and titanium have high chemical activity, and zirconium is higher than titanium, but the surface can form a dense passivation film, has a high corrosion resistance. Zirconium has better corrosion resistance than titanium in most highly corrosive media, which is why zirconium is more expensive than titanium, but is still used in many chemical applications.

Continue Reading →

Understanding Nitinol

Firmetal, 2020-4-9 09:37:00 PM

Nickel-titanium alloy is a shape memory alloy, which can automatically restore its plastic deformation to its original shape at a certain temperature. Its expansion rate is more than 20%, fatigue life up to 1×10 to the seventh power, damping characteristics than the ordinary spring 10 times higher, its corrosion resistance is better than the current best medical stainless steel, so it can meet all kinds of engineering and medical application requirements, is a very good functional material.

Continue Reading →

Tantalum tungsten alloy

Firmetal, 2020-4-8 09:39:00 PM

Tantalum alloy formed by adding a certain amount of tungsten to tantalum. TaW binary alloy of tantalum and tungsten is an infinite solid solution. At 200℃, the reliability of ta-w alloy in acid and neutral medium is even higher than that of gold and foil. Tantalum tungsten alloy quality is good, tantalum basic in other environments can quickly form a layer of surface oxide film and carefully coated on its metal matrix, the oxide film is thin and very fine, to the basic all media are impermeable, and if the damage, can immediately get better.

Continue Reading →

Zirconium alloy corrosion resistant coating

Firmetal, 2020-4-7 09:40:00 PM

Zirconium alloy under high temperature and high pressure water in the nuclear reactor environment is easy to react with water vapour Zr + 2H2O + 2 = ZrO2 h2 write, produce hydrogen gas in high temperature environment is easy to cause hydrogen explosion, nuclear safety accident caused by ceramic coating of high strength, high hardness, wear resistance, high temperature resistance, oxidation resistance, corrosion resistance and chemical character such as stable performance can resolve the situation.

Continue Reading →

Separation of tantalum and niobium

Firmetal, 2020-4-3 09:30:00 PM

A hydrometallurgical method for separating tantalum and niobium from raw materials containing tantalum and niobium by treating them with pure hydrofluoric acid or a mixture of hydrofluoric acid and sulfuric acid, followed by extracting the tantalum and niobium complexes in the treated solution with a methyl isobutyl ketone solvent and steam distilling the organic ketone phase containing tantalum and niobium.

Continue Reading →

Preparation method and process of tantalum tungsten alloy blank

Firmetal, 2020-4-2 09:41:00 PM

Tantalum tungsten alloy is a kind of alloy with tantalum as the matrix and a certain amount of tungsten added. Although both tantalum and tungsten can infinite solid solution, but when the tungsten content in more than 12-14 at % at % alloy plastic will be significantly reduced, when tungsten content is low, tantalum tungsten alloy as the pure tantalum low-temperature plastic, and has high strength, resistance to oxidation and corrosion resistant ability, so the lower……

Continue Reading →

Application of titanium in new industrial field

Firmetal, 2020-4-1 09:46:00 PM

Titanium alloy is a relatively young metal, from the development of the present 60, 70 years of history, into the 20th century after the traditional steel and aluminum has been unable to meet the needs of aerospace, aviation, navigation and other fields, in 1954 by the United States company developed titanium alloy materials.

Continue Reading →

Niobium powder

Firmetal, 2020-3-31 09:45:00 PM

Niobium powder, metal niobium powder, the formation of a dense oxide film on its surface with unidirectional conductive valve metal properties. The Nb2O5 oxide is a white powder with a purity of 99.999%. It is used to produce high purity lithium niobate crystals and special optical glass additives. The anodic oxide film has stable chemical properties, high resistivity, small leakage current and large dielectric constant.

Continue Reading →

Contact Us

Firmetal Co., Ltd.

Address: Ocean Towers, 550 Yanan Road (East), Shanghai China 200001
Tel: +86 21 36525738
Fax: +86 21 36525161